Two-component, high-performance polyurethane adhesive for ceramic tiles and stone material.

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift.

Ready-to-use, quick-setting and hardening, anti-shrinkage hydraulic binder.

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures.

Paintable acrylic sealant for movements.

Self-levelling, ultra-quick hardening mortar with special hydraulic binders, applied at a thickness between 5 and 40 mm to create abrasion-resistant floors.

Pre-blended, high-performance, polymer-modified cementitious mortar with water-repellent DropEffect® technology for grouting joints up to 6 mm wide.

Two-component, rapid-setting thixotropic adhesive for structural bonds.

High-performance, silicone water-repellent in watery solution for external walls.

Two-component, high-strength, castable epoxy-polyurethane sealant for movements up to 5%.

Synthetic latex rubber mixed with KERACRETE POWDER (white or grey) or with sand and cement (thickness up to 5 mm).

Two-component, super-fluid epoxy resin for injections and anchorings.

Two-component epoxy resin with a very low viscosity for injecting into micro-cracks.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect® and mould-resistant BioBlock® technology for grouting joints 2 to 20 mm wide.

Bitumen waterproofing emulsion for general purpose use.